Notre boutique utilise des cookies pour améliorer l'expérience utilisateur et nous vous recommandons d'accepter leur utilisation pour profiter pleinement de votre navigation.
In Code Division Multiple Access (CDMA) mobile environment, transmitter and receiver signals are heavily influenced by the effect of clutter.
The ability to optimize a CDMA system is then dependent on the initial system configuration at the deployment stage.
This includes the site location, antenna type, orientation, down-tilt and the choice of propagation model which contributes greedily to a better optimization of the network.
For the prior optimization of the network, the propagation parameters should be optimized.
The parameters that influence the received signal such the terrain topology with regard to the mechanical down-tilt are presented.
In incorrect coordinate of the BTS cell site, a poor coverage was also observed.
Furthermore, the measurement of the received power from CDMA pilot carried out during the drive-test in Greater Accra, Ghana was used to evaluate the excess path loss.
This is obtained between Hata-Okumura Models and the measured path loss.
The prediction response was not satisfactory in the study area therefore the prediction model was then tuned by the use of the least square algorithm.
Agbeblewu Dotche,graduate student of the University of Lome, obtained D.U.T in Electrical Engineering in 2004 and MSc Telecommunications Engineering in 2010 at Kwame Nkrumah University of Science and Technology (KNUST).
He is currently working towards his Ph.D.
Semi-conductors, SNR lecturer; Head of Computer Engineering,KNUST.
Attention : dernières pièces disponibles !
Date de disponibilité: